Automatic Cupping Tester

Product Introduction

The automatic cupping tester can rise automatically at a speed of 0.2 mm/s, which is a standard requirement. Eliminate errors caused by hand raising. In addition, it is equipped with a high-definition screen that allows the operator to clearly observe the damage (cracking) from the sample being tested, making it easier and more accurate to judge the test results.

Standards

It complies with ISO 1520, BS 3900 Part 4, DIN 53166, DIN 53233, etc.

Product Features

1. The punch is automatically lifted (constant speed: 0.2 mm/s) for more reliable and comparable test results.

2. Automatic coordinate positioning system: The machine can remember the original position after zeroing and automatically locate the punching position.

3. High-power magnifying glass and high-definition display, judging the test results is easier and more direct. No concentration is required throughout the test.

4. The lifting distance of the punch can be freely set from 0 to ~18 mm

5. High-precision grating displacement sensor, accurate positioning, accuracy up to ±0.01 mm

6. The maximum width of the panel can be tested at 90 mm

Technical Data